Hộp số cần cẩu QJY
Thông số kỹ thuật hộp số cần cẩu QJY
- Mẫu: QJYD2, QJYD3, QJYD23, QJYD34
- Tỷ số truyền:
QJYD2: 6,3; 7,1; 8; 9; 10; 11,2; 12,5; 14; 16; 18; 20
QJYD3, QJYD23: 20, 22,4, 25, 28, 31,5, 40, 45, 50, 63, 80, 90, 100
QJYD34: 100, 125, 140, 160, 200, 224, 250, 280, 315, 335, 400
- Các loại lắp ráp: I, II, III, IV, V, VI, VII, VIII, IX
- Dải mô-men xoắn đầu ra: Từ 1.550 Nm đến 323.000 Nm
Overview of QJY Crane Gearbox
The QJY hộp số cần cẩu is a hard-tooth surface gearbox (carburized and quenched tooth surface) designed specifically for cranes. It is primarily used in various crane mechanisms but is also suitable for other machinery, including transportation, metallurgy, mining, chemical processing, and light industrial equipment, where reliable power transmission is essential.
Tính năng
- Materials: The gears are made from high-quality, low-carbon alloy steel that is carburized and quenched, achieving a gear accuracy grade of 6.
- Performance: This gearbox is characterized by high precision, high efficiency, smooth transmission, and low noise. Compared to the QJ series tempered gearbox, it offers a more compact size, lighter weight, higher load capacity, and greater reliability.
- Cấu trúc: It features a welded housing and supports both three-point mounting and base mounting.
- Output Shaft Types: The output shaft is available in four configurations: flat key, involute spline, gear shaft end, and hollow shaft.
- Lubrication and Cooling: Typically, an oil sump lubrication system with natural cooling is used, though vertical gearboxes may adopt circulating oil lubrication. Rolling bearings are also used.
Điều kiện vận hành
- Input Speed: Generally, n1<1500n_1 < 1500 r/min.
- Phạm vi nhiệt độ: Operates effectively in temperatures ranging from -40°C to +50°C.
- Directional Operation: The gearbox is capable of bi-directional operation, making it adaptable to various crane gearbox types.
- Các tùy chọn lắp đặt: Available in multiple assembly configurations, enhancing versatility for different applications.
Assembly form
QJYD2: Shape and dimensions table
QJYD3: Shape and dimensions table
QJYD23: Shape and dimensions table
QJYD34: Shape and dimensions table
Output Shaft Types and Dimensions
allowable maximum radial loads for the gearbox’s output shaft
| Khoảng cách giữa các trục | 140 | 170 | 200 | 236 | 280 | 335 | 370 | 400 | 450 | 500 | 560 | 630 | 710 | 800 | |
| Tải trọng hướng tâm tối đa cho phép (kN) | 2 | 9 | 15 | 21 | 28 | 35 | 43 | 55 | 60 | 75 | 100 | 107 | 120 | 150 | 170 |
| 3,4 | 9 | 15 | 28 | 35 | 48 | 55 | 64 | 93 | 120 | 150 | 170 | 200 | 240 | 260 | |
